How to Perform an HP Laptop Battery Replacement

 In case you hadn’t noticed, the battery in your laptop isn’t meant to last forever. You may have realized that you spend hours charging your laptop only to have it run out of battery power within a short period of time. This is because over time, your battery’s capacity lessens so won’t be the same as it once was.

There’s good news, though. Laptop batteries can be replaced. So if you’re wondering how you can install a new battery on your own, this article will show you how.
This guide will help you make the repair quickly and efficiently so you can get back to work and enjoy the maximum battery life of your device.

Before you think about opening up your computer and starting this process, you first need to order a new battery. RAM INFOTECH can be helpful with this, but you can also find the make and model of your computer yourself to avoid ordering the wrong replacement battery.

RAM INFOTECH LAPTOP SERVICE

CALL AS ::9841983665



Determine your serial number and which company your computer was manufactured by before going online to find a new battery. Also, see if you can easily determine the battery’s own model number and serial number while performing your search.
If you’re not sure how to find a replacement battery for an HP laptop, you have a couple of options:
  • Use the battery finder tool to find the right replacement
  • If you need to replace an older computer’s battery, perform a search on a third-party website

2. Create a battery report in Windows

The report provides an overview of how the battery performed in the past and an overview of its past three charging cycles. You will want to take a look at the Design Capacity vs the Full Charge Capacity in order to determine whether it is worth replacing the battery.

                            RAMINFOTECH 


                      CALL AS :: 9841983665



If there is a big difference between how much the battery could hold when you unboxed your computer and now, then it’s likely a replacement is necessary.

4. Remove the back panel of your laptop with a screwdriver

Most HP laptops require the removal of the back panel for a battery replacement. This means that you might have to invest in a Phillips-head #0 screwdriver or a laptop opening kit, both of which are inexpensive and can make the process of installing a new battery much simpler.

                             www.raminfotech.in


                           CALL AS : 9841983665



There may be some rubber feet on the back panel that you’ll need to remove before you can access the battery, but this depends on your HP laptop model. Use a plastic opening tool to pry off the rubber, which will allow you to remove the screws that hold the body of your laptop together.
Use the Phillips screwdriver to loosen the screws on the back panel and then gently remove the back cover of your laptop. This may require you to use the plastic tool again to loosen the edges. It’s usually easier to start in a corner and carefully dislodge the panel, but be sure to take care not to harm the components inside.


6. Connect your new battery to the body of your laptop

At this point, you can begin the process of connecting the new battery. After you insert the new battery, you will need to reverse the steps you just completed to get your computer up and running again.
  • Connect the cable on your computer to the new battery carefully
  • Screw your battery back into the body of your device
  • Make sure the battery is firmly in place, but not too tight or else it could damage some components

7. Replace the back panel


                                  raminfotechvelachery@gmail.com

                                         CALL AS:: 9841983665


Line up the back cover to the rest of your laptop before using your Phillips screwdriver to put the cover back on. Again, you’ll want to be careful not to make things too tight or too loose, because either one can damage your device. Replace the rubber footings on the bottom of your laptop if your computer has them.

8. Confirm performance with a new battery report


Once everything is lined up and put back together, plug your computer into a power source. After a few minutes of charging, turn on your laptop to make sure everything starts properly. If your laptop appears to be working properly, you will want to perform another battery report to see what your Design Capacity is and if it all looks the way you would expect. If it does, you’re ready to use your laptop again - this time with proper battery life!

RAM INFOTECH LAPTOP SERVICE

 CHENNAI PVT LTD

             CALL AS :: 9841983665